Everything to Know About Asphalt Paving

Asphalt paving lasts longer and looks better while only requiring a quick and affordable installation process. Moreover, there are no ifs and buts about the convenience of having an asphalt parking lot. Loxahatchee residents can get a trusted local company like Trinity Asphalt Paving to lay down an environment-friendly driveway in their home. After all, when properly integrated, asphalt not only adds value to your home’s visual appearance but also enhances the drivability of any motor vehicle.

However, if you’re still not sure about implementing an asphalt parking lot or driveway due to inadequate information, we have you covered in this article. You can read on to learn everything to know about asphalt paving, including its benefits and risks, to make the best decision for yourself!

Top Benefits of Asphalt Paving

1- Long-Lasting

In general, an asphalt lot installed by an experienced contractor usually lasts for fifteen to twenty years. Plus, you can elongate its lifespan even further by keeping up with regular preventative maintenance.

2- 100% Recyclability

Since asphalt is a 100% recyclable material, it can easily be referred to as the most environment-friendly option to integrate your driveway.

3- Cost-Effective

Compared to concrete and other sturdy materials, asphalt implementation costs significantly less. The only component that may fluctuate the material’s overall price from time to time is the addition of crude oil.

4- Noise Reduction

Asphalt paving is also the most noiseless pavement option, thanks to its fine-graded surface that absorbs maximum sound.

5- Maximum Water Drainage

Furthermore, asphalt pavement, especially porous asphalt, is one of the best choices you can make to ensure maximum water drainage. Other types of asphalts are better to redirect the water to other areas where it can be well-managed.

6- Fast and Easy Installation

Lastly, the components required to create asphalt are easy to get a hold of, so you can expect the project to be finished in the least possible time.

Types of Asphalt Paving

1- Porous Asphalt

The term “porous” exhibits how this asphalt has tiny pores to provide a practical way for managing rainwater. This is also the most environment-friendly option of all.

2- Coarse-Graded Asphalt

Coarse-grade asphalt is used as a binder to support fine-graded mixes when you want to lift surfaces on parking lots and driveways.

3- Cold Mix Asphalt

Cold mix asphalt is usually used to repair potholes. It stays soft during cold weather and also repels water puddles.

4- Warm Mix Asphalt (WMA) and Hot Mix Asphalt (HMA)

Warm mix asphalt is heated and poured at temperatures between 200 and 250 degrees Fahrenheit while hot mix asphalt is produced between 300 and 350 degrees Fahrenheit. The prior option contains fewer human fossils than hot mix asphalt but requires more binding materials.

Potential Asphalt Damages

1- Cracks

From acquiring cracks due to thin pavement to accumulating stretch marks because of poor bonding, you may lead to such circumstances when your choice of contractor for implementing asphalt is not the best.

2- Potholes

Potholes (broken pieces of pavement) result from rough weather and heavy traffic wear and tear. However, the damage can be avoided if you keep your pavement regularly maintained.

3- Base Failure

Base failure happens due to poor drainage when a part of asphalt carries too much weight because of an installation error.

4- Depressions

Similarly, depressions are technically faulted low-elevated areas that hold water and weaken the bonding structure.

Asphalt Paving Repair Options

1- Sealcoating

Sealcoating is a preventative measure that protects asphalt from fuel drippings, rough weather conditions, and heavy traffic. It’s recommended to seal coat your old pavements every couple of years during the warm season.

2- Crack Filling

As the name indicates, crack fillings are used to fill in small cracks so no water passes through them that might weaken the asphalt pavement.

3- Patching

Patching is the method of filling in potholes where the contractor must remove the damaged pavement, clean it, and then repair the foundation before filling the pothole again.

4- Milling

Milling is a cost-efficient technique of removing an asphalt paving’s topmost layer without disturbing the underlying base. This is perfect when your pavement’s foundation is solid, but the upper layer needs some repair work.

5- Overlay

An overlay is a process of tending to asphalts that aren’t damaged enough to warrant a complete replacement, but they show potential signs of cracking and potholes. You can think of it as a large patching job over a particular section of asphalt pavement.

Do you want to make a final decision much more proficiently before hiring a company for building asphalt parking lot? Loxahatchee residents can learn a few basics on asphalt paving given here, including its types, benefits, damages, and repair options, to make an informed decision. To learn more give us a call at (561) 889-2615.